6.1. Connecting DMX signal
Control signal is digital and is transmitted via two pair screened cable, as recommended in international standards for the transmission
of DMX512. Connection is serial, utilising the XLR5 sockets located on the rear panel of the
Par Lite LED.
Signal connection via the XLR5 connectors
Connection is to international standards. Connection is as indicated below:
pin 1 = GND
pin 2 = data -
pin 3 = data +
Should your DMX 512 controller output signal via a cannon XLR5 (5 pin), pins 4 and 5 should remain unconnected.
6.2. Powering up
After having followed the preceding steps, turn on mains power on to the unit.
The
DISPLAY
will
come
on.
Turning on power with DMX signal connected.
The Display
will
flash
to
indicate
that
DMX
512
is
not being
correctly
received.
If
the
Display
not flash,
the DMX
signal
is
being
received.
ATTENTION!!
Ensure that all data conductors are isolated from one another, the screening and the metal housing of the connector.
Pin number 1 and the housing should never be connected to mains power.
3
2
1
Controller
Standard
DMX 512
OUT
out
in
Ad altri
Par Lite Led
Connect to other
Par Lite Led
out
in
6. DMX signal functions
12
English
ParLite Led maintains in its memory the last DMX scene before its turning off. When turned on again whennot connected to DMX
signal, ParLite Led will perform the last DMX scene before being turned off.
Store the last DMX signal received
