Coemar Panorama Led White, Instruction Manual, Page: 17 / 20

The two leds on the dip-switch panel indicate the functionality of the Panorama Led White .
A thermal sensor in the body of the Panorama Led White protects the fixture against overheating . The sensor operates by remov-
ing power to the leds should the operating temperature exceed the factory preset.
Whilst every possible precaution has been taken to ensure the trouble-free operation of your Panorama Led White , the following peri-
odic maintenance is highly recommended. We recommend that the voltage to the unit be removed prior to any maintenance proce-
dure taking place.
11.1. Fuse replacement
Use a multimeter to check the fuse, replacing any faulty or damaged fuse with ones of equal value, dimensions and characteristics. The
following diagram indicates the positioning and characteristics of the protection fuse in the fixture.
Fuse “A”: 4A T 250V
11.2. Periodic maintenance
Mechanicals
Periodically check all mechanical devices for wear and tear, replacing them if necessary. Periodically check the lubrication of all compo-
nents, particularly the parts subject to high temperatures. If necessary, lubricate with suitable lubricant, available from your
Coemar dis-
tributor.
Electrical components
Check all electrical components for correct earthing, oxidation and proper attachment of all connectors, cleaning and refastening if nec-
essary.
All the components of the Panorama Led White are available as spare parts from your Coemar service centre .
Accurate description of the fixture, model number, and type will assist us in providing for your requirements in an efficient and effective
manner.
12. Spare parts
ATTENTION!!
Always remove mains power prior to opening up the fixture!
11. Maintenance
10. Thermal protection
Led Function Led on Led off Led flashing
Green Power Present Absent Undefined
Yellow DMX state
DMX poorly
connected
No DMX signal DMX OK
9. Switch panel signal
17
English