4.5. Adjusting the beam angle
There are several optional interchangeable optical lenses groups and filters which enable the beam angle to be adjusted to suit your
specific lighting application.
The standard optical lenses group for the
Panorama Led RGB
is parabolic.
The following diagrams illustrate the sequence necessary for replacing the optics of the fixture.
1.
Open up the housing as described in section 4.4.
2.
Remove the four screws
“A”.
3.
Remove the parabola
“B”
.
4.
Insert the desired lenses group
“C”
, ensuring that the leds on housing
“D”
are correctly fitted into the lens seats.
Users of the optional IR remote should ensure that the opening “E” is correctly aligned on the lens group with the con-
trol signal sensor located on the bottom right of the led housing (as shown in the diagram above).
To further adjust and diffuse the beam angle, various filters can be added to the fixture.
5.
After having fitted the lenses group, insert the filter
“G”
.
6.
Fit the appropriate filterholder
“F”
.
7.
Refasten the 4 screws
“A”
.
8.
Reclose the cover.
The following table details the range of beam angle and diffusion filters available for the
Panorama led RGB
.
Optical group
Beam angle
1.
Narrow Lenses (cod. 9844)
12°
2.
Narrow Light Frost Filter (cod. GE07)
17°
3.
Narrow Frost Filter (cod. GE08)
25°
4.
Medium Lenses (cod. 9845)
30°
5.
Medium Lenses + Light Frost Filter (cod. GE07)
35°
6.
Medium Lenses + Frost Filter (cod. GE08)
45°
7.
Flood (standard parabolic)
130°
8
English
