Coemar LEDko EXT, Manual, Page: 20 / 29

20
dISP
[Display]
611 - 19000
DMX channels:
Shows the DMX mode and number of channels
selectable;
Display functions:
Changes the display settings:
• Reverse:
rotates the display of 180°;
• Password selection: allows to
choose a personal password, to do this use
the buttons on the back panel (menu=1,
enter=2, plus=3, minus=4). To unlock the
projector, press the keys in the order previ-
ously decided;
• Auto:
Sets or disables the automatic display
turn off function, which would occour after
10 seconds of inactivity;
• Password:
allows to choose whether to set
the password or not;
Note:
The AUTO and HOLD function become
active only when the DMX address selection
is displayed (A001). The effect of AUTO and
HOLD trigger after 10 seconds of keyboard in-
activity. To turn on the display it is enough to
push a button, to unlock the keyboard it is nec-
essary to hold any button down for a few sec-
onds.
LED Frequency:
Allows to choose the operating frequency of
the LEDs in order to avoid flickering issues with
video recording devices. The excursion varies
from 611 Hz (default) to 19000 Hz.
Default Settings:
It restores all the settings to default value ex-
cept for led settings, hour and DMX address.
Measures:
Allows to read all the parameters: LED and
board temperatures, fan level, DMX ratio,
DMX, alarms, channels value and software ver-
sion.
dMX
[DMX channels]
FrE
[LED Frequency]
5 CH
[5 Channels]
1 CH
[1 Channel]
rurS
[Reverse]
PSEL
[Password selection]
AUtO
[On - Off]
dF.SE.
[Default Settings]
MEAS.
[Measures]
PASS
[Password]