Coemar LEDko D, Instruction Manual, Page: 12 / 30

12
5
. Powering up
5.2
Connection to mains power
Mains cable characteristics
The mains cable provided is thermally resistant, complying to the most recent International
standards.
Note: in case of cable replacement, similar cable with comparable thermal resistant
qualities must be used exclusively (cable 3 X 1,5 ø external 10 mm, rated 300/500V, tested
to 2 KV, operating temperature -40°C + 180°C, Coemar cod. CV5311).
Connection to mains power
LEDko T/D is equipped with two power connectors, one as input and one as output,
which can be used to feed up to 8 (at 230 VAC) or 4 (90 VAC) fixtures.
The max absorption of
LEDko T/D
is reported in the following table:
- 230 VaC 1,2 A constant during normal exercise.
- 90 VaC 3 A constant during normal exercise.
5.1
Operating voltage and frequency
The unit may operates at voltages ranges from 90 to 230VaC at a frequency of 50 or
60 Hz. It is not needed to effect any setup procedures:
LEDko T/D
will automatically adjust
its operation to suit any frequency or voltage within this range.