14
Warning!
Make sure that screening and conductors are not in contact one another or with the
metal housing of the connector.
Pin#1 and housing must never be connected to the power supply unit.
6.1
Control signal connection by XLR5 plugs
The digital control signal is transmitted to the projector via two pole cable screened according
to the International standards for the transmission of DMX 512 data. The connection must be
serial, using connectors XLR5 male and female located on the back of
SoftLite Led VariWhite
labeled DMX512 IN e OUT (see diagram).
Connectors equipped on
SoftLite Led VariWhite
are IP rated, which ensures protection
against water and dust. In order to keep this rating they must be connected exclusively to other
IP rated connectors.
Pin 1 = Ground (GND)
Pin 2 = Data -
Pin 3 = Data +
Pin 4 = Not connected
Pin 5 = Not connected
6.
Control signal connections