CODUME
Page 9
6
This clearly indicates the
marking of the centre of the
intake hole.
Note: The length of the two
pipes depend of the wall-
thickness.
7
All necessary markings show.
Note: The holes for the pipes
should have a downward start
of 1-2%, to prevent hard rain
from penetrating the unit.
8
Here, both holes have been
drilled, and the wall frame is
now securely fastened to the
wall.
Note: The screw type used
depends on the wall material.
9
Place the unit on a thick
underlay, such as cardboard
or the like, to prevent
scratches in the base plate. It
is important that the unit is
stable on the lift.
Note: Remember to remove
tape holding the discharge
damper in the transport
position.
10
The unit is on the underlay
and is safely and securely
placed on the lift.
In the picture on the right, the
unit is raised and can now be
adjusted to the two guide
hooks placed on the wall
frame.
