CODEL
Page 6
Operation and Maintenance
Issue: A
Revision:
Date: 10/10/18
Ref: 100533
4.2
Unit Installation
Figure 2: Enclosure Dimensions
The product must be fastened with suitable equipment.
The fastening means must guarantee the mechanical seal
when a force equal to at least 4 times the weight of the
device is applied.
The pan/tilt bracket allows the TunnelTech 601 to be panned
through a 360° lateral angle and tilted vertically through ±120°.
The main device housing is attached to the tilt/pan bracket via two
M6x12mm 10mm hex head bolts and m6 washers, supplied with
the bracket. This is attached to the two threaded mounting holes
on the underside of the enclosure.
The bracket should be firmly mounted to its intended mounting
surface with 4 x M6 bolts (supplied by others) through the pre-
made mounting holes in the base of the bracket.
Figure 3: Bracket dimensions
Summary of Contents for TunnelTech 601
Page 2: ...CODEL Page 2 Operation and Maintenance Issue A Revision Date 10 10 18 Ref 100533...
Page 4: ...CODEL Page 4 Operation and Maintenance Issue A Revision Date 10 10 18 Ref 100533...
Page 6: ...CODEL Page 6 Operation and Maintenance Issue A Revision Date 10 10 18 Ref 100533...
Page 8: ...CODEL Page 8 Operation and Maintenance Issue A Revision Date 10 10 18 Ref 100533...
