Technical Manual
Page
12
CODEL
Issue : A
Rev. :
Date : 29/06/2015
Ref. : 100190
4.3.2 Horizontal Alignment of Transmitter
4.3.2.1
Slide the laser adaptor over the sight tube so that the laser pointer is at the top of the sight tube. Ensure that the
holes in the adaptor flange locate onto the heads at the sight tube mounting bolts.
Loosen screw 1 slightly to allow movement at the bracket. Position the laser line onto the centre of the receiver
site tube then tighten screw 1, see Figure 5.
Figure 5: Horizontal Alignment
Receiver
Transmitter
Screw 1
Tunnel mounting wall
Screw 1
Transmitter
Movement direction
Summary of Contents for TunnelTech 100 Series
Page 3: ...Technical Manual CODEL Issue A Rev Date 29 06 2015 Ref 100190...
Page 6: ......
Page 8: ......
