5
2.5.2.2 Confirming Output State Memory Mode
Confirming the output state memory mode of
CODE Tc-182
by No.10bit
switch
of
DIP encoder. While the position
of No.10bit switch is “A”(moved at upside), this set is in data memory state. It means of DMX-512 control signal
broken off abruptly, the current output state of every channel is not changed. Whereas, the position of No.10bit
switch is “B”(moved at downside), The data memory function is closured.
2.5.3 DMX-512 Signal Input Pilot Light
The pilot light is twinkling while receiving normal DMX-512 signal. Otherwise, it is blank.
2.5.4 Channel Output Sate Pilot Light
The Pilot lights are luminous while their channels are turn on. Otherwise, they are blanking.
2.5.5 Operation Power Switch
The switch turns on or turns off the operation power supply which powers for MPU unit of
CODE Tc-182
Thyristor
Digital Switch Pack. (I: turn on, O: turn off)
