C006244_01_CR4100_QuickStart_Guide
2.0 - Inserting the Battery
1. Using the flat portion of the stylus (Figure 1), insert the tool into the slot on the battery
cover located on the back of the unit (Figure 2). Rotate the slot clockwise from LOCK to
UNLOCK.
2. Making sure a portion of the strap is exposed (Figure 3), insert the battery such that
the contacts of the battery are aligned with the pins inside the CR4100 (Figure 4).
3. Place the cover back on the CR4100.
4. Using the flat portion of the stylus, rotate the slot counterclockwise from UNLOCK to
LOCK (see Figures 1 & 2).
2.1 - Removing the Battery
1. Using the flat portion of the stylus (Figure 1), insert the tool into the slot on the battery
cover located on the back of the unit (Figure 2). Rotate the slot clockwise from LOCK to
UNLOCK.
2. Pull on the strap, and the battery will pop out.
3. Insert a new battery, or leave empty (see Section 2.0 - Inserting the Battery).
4. Place the cover back on the CR4100.
5. Using the flat portion of the stylus, rotate the slot counterclockwise from UNLOCK to
LOCK (see Figures 1 & 2).
2.2 - Attaching/Removing the Hand Strap
1. To attach the hand strap, using a Philips head screwdriver and supplied screws, attach
the top portion of the hand strap to the back of the CR4100 (Figure 5).
2. Slide the plastic key on one end of the hand strap into the slot on the bottom of the
CR4100 (Figure 6).
3. To remove the hand strap, slide the plastic key on the end of the handstrap out of
the slot at the bottom of the CR4100 (Figure 6) and use a Philips head screw driver to
remove the screws in the top portion of the hand strap (Figure 5).
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
2
