Code Gobo 200, Manual

Page: 14 / 20

English Manual
- 4 -
Panel of GOBO 200
No. Name Functions and purposes
1
power
switch Switch of AC power of the controller.
2
blackout
key
The key state is indicated by LED as following:
♦
When its LED is on, the controller is in blackout state;
♦ When its LED is off, the controller is in running state;
3
CH1~CH12
channel slider
In program edit, move the slider can change the channel control
value of a specified scanner.
4
manual
operation key When its LED is on, the controller is in manual state;
5 Number key
1~16
These keys are used to choose chase program and scanner.
6
LCD
display Display the current state of the controller and various setting values.
7
delete
key
Be used in program edit state:
♦
Press the key quickly to delete the current chase step.
♦
Press the key for more than 1 second to delete chase steps
quickly until the chase program is empty.
8 ◄ Direction key In program edit, use it to check chase steps backwards.
9 ► Direction key
In program edit, use it to check chase steps forwards.
If the current step is the last one (with *), press the key to add a step
and copy the contents of the current step to the new one.
10
program
key
♦ Press the key for more than 1 second, its LED is on and the
controller is in chase program edit state;
♦ Press the key for more than 1 second again, its LED is off and
the controller is in running state;
11
speed
slider Adjust chase speed, 0=slowest, 100%=fastest.
12
cross
slider Adjust cross time between steps, 0=slowest, 100%=fastest.