CODE Flame 384 User’s Manual
http://www.codelight.com
6
1 ~ 16 Chase number keys
Cooperating with Chase section key, 16 Chase keys can operate A01-A16, B01-B16, C01-C16, 48
Chases. Using SINGLE
key, single Chase or multi Chases can be operated.
Edit
SAVE TO SCENE
Scene save key
Save the current channel values of the scanners to a scene with some
number.
Set the channel values of various scanners with manual operation, or add
some scenes, then press the key first, and press scene section key and scene
number key. The current channel values of the scanners are saved to the number of that section.
EDIT CHASE Chase edit key
Press the key, the indicating light blink. It is in the Chase edit state.
Press the key again, the indicating light is off. The edit result is saved and the edit state is quitted.
SET X/Y X/Y set key
Write the X/Y control channel number of various scanners to the console, then use modulation wheels to
control the position of the various scanners.
LOAD FILE / DELETE Import Files / Delete key
Press the key and hold 2 seconds, to import files from USB Drive or when the Chase is edited, press the
key to delete the current Chase step.
SAVE FILE / ADD Backup files / Add key
Press the key and hold 2 seconds, to backup files to USB Drive or when the Chase is edited, press the
key to add a new Chase step after the current one.
If the current Chase step is the last one of the Chase, the parameters of the current Chase step are
copied automatically to the new added Chase step.
ENTER / SWITCH Enter/Switch key
In scene edit and environment edit, it is ENTER key.
In Chase edit, it is SWITCH key.
WX
、
ST
MODULATION WHEELS
In edit Chase,
WX
is used to change edit item,
ST
is used to set the value of
the item.
In manual operation mode,
WX
is used to set the X position of a scanner,
ST
is used to set the Y position.
