D018433_01_CR4405_User_Manual
3
5.0 - iPhone Installation in the Sled
Open the three security latches on the sled (Figure 13). Slide the phone on to the connector (Figure 14). Close the cover and secure
the latches. Phone removal is done in reverse. Be careful to not bend the electrical connector outward while sliding the phone away
from it.
3.2 - USB Direct Connection to Sled
1. Plug the Micro-B side of the USB cable into the sled (Figure 11).
2. Plug the other side of the USB cable into a computer USB port (Figure 6).
3. During charging, the LED located at the top right corner of the sled (Figure 9) will light up according to Figure 10.
NOTE: The USB cable provided was custom developed to reduce charge time. Using a non-Code cable may significantly increase the charge time.
Figure 11
4.0 - Charging a Spare Sled Battery
A spare sled battery can be docked for charging in the rear bay of the Charging Station (Figure 12). Similar to LED Bank 1, upon
battery insertion all four LEDs of LED Bank 2 will rapidly flash indicating readiness to charge, and then display spare battery status
according to Figure 8.
Figure 12
Spare Battery Cartridge
Rear Charging Bay
Rear Charging Bay LEDs
Security
Latches
Figure 13
Figure 14
Connector
