background image

6

ca5054 Owners rev A

 Remote Start Safety Features

 

For safety and security reasons, the system will shutdown or prevent the remote 

vehicle starter from activating if any of the following occur:

   

1.  The vehicle hood is open.

   

2.  The brake pedal is pressed prior to turning the ignition key to the ON  

   position.

   

3.  The engine is over-revved (tach checking only).

   

4.  Valet mode is active.

 Operating the Daily Start Timer

 

The system has the ability to start your vehicle based on a 24-hour countdown timer.  

This feature requires a two-part activation sequence. From the remote, while ine range 

of the vehicle, pressing both the 

 & 

 buttons together will activate the 24 hour 

countdown timer (the vehicle will start 24 hours from this time).  Next, When you are 

finished operating the vehicle for the day, perform the following steps to complete the 

process. 

   

1.   Turn the ignition ON/OFF (vehicle must be disarmed).

   

2.   Within 10 seconds, while pressing the brake, press and release the 

  

 

 

button twice.

   

3.   The vehicle will emit 2 chirps and flash the parking lights 4 times.

 

To begin the 2 / 3 hour start up timer mode:

  

1.    Turn the vehicle’s ignition ON then OFF.

   

2.    Press and hold the valet button.

   

3.  Press the 

 button 4 times, the system will; 

   

 

 

a.   When set for 3 Hour (default) - chirp 2 times and flash the  

 

 

 

 

parking lights 4 times.

   

 

 

b.   When set for 2 Hour - chirp 1 time and flash the parking  

 

 

 

 

lights 2 times.

   

4.  Release the valet button.

 

To exit the 2 / 3 hour start up timer mode:

  

1.  Turn the vehicle’s Ignition ON.

  

 OR

   

1.   Activate the remote vehicle start feature using the remote  

                    

   control.

Summary of Contents for Professional ca5054











Reviews: