12
ca6155E Owners rev B
Remote Start Safety Features
For safety and security reasons, the system will shutdown or prevent the remote
vehicle starter from activating if any of the following occur:
1. The vehicle’s hood is open.
2. The brake pedal is pressed prior to turning the ignition key to the ON
position.
3. The engine is over-revved (tach checking only).
4. Valet Mode is active. Refer to the Valet Mode section of this manual on
page 5.
5. Remote Start Ready Mode is not set. Manual transmission vehicle’s only.
Operating the Daily Start Timer
The system has the ability to start your vehicle based on a 24-hour countdown timer.
This feature requires a two-part activation sequence. From the remote, while in range
of the vehicle, pressing both the &
buttons together will activate the 24 hour
countdown timer (the vehicle will start 24 hours from this time). Next, When you are
finished operating the vehicle for the day, perform the following steps to complete the
process.
1. Turn the ignition ON/OFF (vehicle must be disarmed).
2. Within 10 seconds, while pressing the brake, press and release the
button twice.
3. The vehicle will emit 2 chirps and flash the parking lights 4 times.
Temperature Start Mode
The system has the ability to start the vehicle if the temperature drops below a preset
temperature threshold. Once activated, the system will start the vehicle every 2 or 3
hours, for a 48 hour period, based on the temperature setting and will be cancelled if
the vehicle is started with the key or remote started by the transmitter. Temperature
is read from the module, located below the dashboard in most instances, and the
vehicle’s interior temperature may vary from the ambient temperature.
1. The vehicle must be armed.
2. Press and release both the &
buttons together.
3. The vehicle will emit 1 chirp and flash the parking lights 1 time.
Note: This feature is defaulted OFF and must be set in option programming.
