Code Alarm ca6554 Owner'S Manual Download

Page: 18 / 21

ca6554 Owners revA

Replacing Remote Control Batteries

1 Way 4 Button Remote Control - Model CAT4

The batteries inside each remote control should last approximately 1 year under normal

use. When the batteries become weak you will notice the remote control range (the

distance from the vehicle the remote control will work) deteriorate and the small LED on

the remote control will dim. To replace the remote control batteries:

1. Using a coin, disassemble the halves of the remote

control.

2. Remove the old battery, observing the +/- symbols on the

batteries and replace with a new battery.

3. Reassemble the halves of the remote control

4. Test operation of the remote control.

2 Way LCD Remote Control - Model CATLCD

The AAA battery inside the 2-way LCD remote control should last approximately 6

months under normal use. When the battery becomes weak you will notice the remote

control range (the distance from the vehicle the remote control will work) deteriorate and

the BATTERY icon on the LCD remote control will show 1 bar or less.

1. Gently slide the battery cover off of the remote control.

2. Remove the old AAA battery, observing the +/- symbols on the

battery, and replace with a new AAA battery.

3. Gently slide the battery cover on to the back of the remote control.

4. Test operation of the remote control.

Summary of Contents for ca6554






















Search results

Summary of Contents for ca6554

Reviews:

Related manuals for ca6554

Brands by name

Popular brands

Code Alarm ca6554, Owner'S Manual

Search results

Summary of Contents for ca6554

Reviews:

Related manuals for ca6554

Brands by name

Popular brands