Optional Song Bird Feature
The optional Song Bird feature (Code Alarm SB1 accessory Speaker and labor required) allows you to
program songs and tones to your system (i.e. Setting a different tone for Lock activation and unlock
activation).
Turning Song Bird On: Press and release the TRUNK icon button on the remote control, then press and
hold the LOCK icon button on the remote control within 2 seconds. The speaker will give notification that
Song Bird has be turned ON.
Turning Song Bird Off: Press and release the TRUNK icon button on the remote control, then press
and hold the UNLOCK icon button on the remote control within 2 seconds. The speaker will give
notification that Song Bird has be turned OFF.
Setting Song Bird Tones: Activate the function you wish to program a Song Bird tone to. Within 3
seconds, press and release the TRUNK icon button on the remote control, then press the OPTION
button on the remote control within 2 seconds. Press the LOCK icon button on the remote control or
UNLOCK icon button on the remote control to scroll through the different tones.
While in this mode the TRUNK icon button on the remote control will change the length or version of
the tone (if applicable).
Press the OPTION button on the remote control to select the desired tone and exit programming.
Please see your sales associate for details on Song Bird or any other Code Alarm accessory.
Replacing Remote Control Batteries
2-way Dot Matrix Remote Control:
The AAA alkaline battery inside the 2-way LCD remote control should last approximately 1 year under
normal use. When the batteries become weak you will notice the remote control range (the distance
from the vehicle the remote control will work) deteriorate and the BATTERY icon on the LCD remote
control will show.
1.
Slide the small release tab on the back of the remote control to the unlock position.
2.
Gently slide the battery cover off of the remote control.
3.
Remove the old AAA battery, observing the +/- symbols on the battery,
and replace with a new AAA battery.
4.
Gently slide the battery cover on to the back of the remote control and lock the release tab in
place.
5.
Test operation of the remote control.
1-Way Six Button Remote Control:
The two (2) 3 volt lithium batteries (model CR2025 or Code Alram accessory battery 6BA) inside each
remote control should last approximately 1 year under normal use. When the batteries become weak
you will notice the remote control range (the distance from the vehicle the remote control will work)
deteriorate and the small LED on the remote control will dim. To replace the remote control batteries:
1.
Using a small (#1) phillips screwdriver, remove the screw on the back of the remote control.
2.
Gently unsnap the halves of the remote control apart.
3.
Slide the 2 lithium batteries out of the circuit board, observing the +/- symbols on the batteries
and replace with new lithium 3 volt batteries (model CR2025 or Code Alram accessory
battery 6BA).
4.
Gently snap the halves of the remote control back together and reinstall the phillips screw
on the back of the remote control.
5.
Test operation of the remote control.
12
Summary of Contents for CA 680
Page 14: ...14 ...
