128-6503
2 of 2
KEYLESS ENTRY:
The Lock button on the transmitter is used to lock the vehicle's doors, the
Unlock button is used to unlock the vehicle's doors. To lock or unlock the
doors simply press and release the desired function button one time. As a
keyless entry system, for your convenience, the parking lights will flash once
when the doors are locked and twice when the door are unlocked.
.
REMOTE STARTING THE VEHICLE:
The system WILL NOT start the vehicle if any one of the following situations
exist:
1. The vehicle's hood is opened.
2. The gear shift selector is not in Park.
3. The brake pedal is depressed.
4. The safety control switch is in the OFF position.
1. To start the vehicle, press and release the both buttons on the transmitter
two times within 2 seconds. The vehicle will start and remain running for the
pre-programmed 5,10,15,20 minute run cycle. As a visual indication, the
parking lights will flash or remain on depending on the setting by your
installation center.
2. When you arrive at the vehicle, turn the ignition key to the ON position
(Do not try to restart the vehilce), then step on the brake pedal to disengage
the remote start.The vehicle will continue to run, but now on it's own power.
SHUTING DOWN THE REMOTE START:
To the vehicle, press and release the both buttons on the transmitter. The
vehicle will shut down.
SAFETY (Red Handled ) CONTROL SWITCH:
The control switch allows you to temporarily disable the remote starting
function of your Remote Start system. To disable the unit, move the red
handled control switch to the OFF position.
© 2003 Code Systems, Inc
