128-6530
3 of 10
VALET SWITCH:
The valet switch allows you to temporarily bypass the optional starter inhibit
feature, eliminating the need to hand your transmitter to parking attendants or
garage mechanics. When the system is in valet mode, the optional starter
inhibit feature is bypassed, however the remote panic feature and remote
door locks will remain operational.
1.
Enter the vehicle, and turn the ignition key to the ON position.
2.
Press and hold the valet push button switch until the dash mounted LED
turns on solid. The system will remain in the valet mode.
3.
To return to normal operation, press and release the push button switch
any time the ignition is on.
NOTE: Always remember to return the vehicle to the valet OFF position. This
will ensure that the optional starter inhibit feature remains active at all times
MANUALLY OVERRIDING YOUR SYSTEM:
USING THE VALET SWITCH MANUAL OVERRIDE
The optional starter inhibit feature can be deactivated without the use of the
keychain transmitter. This is necessary, since you will need the ability to
operate your vehicle if the transmitter is lost or its battery fails.
1. Open the vehicle door.
2. Turn the ignition key to the ON position.
3. Within 5 seconds, press and release the valet switch.
The optional starter inhibit feature will enter the (by-passed) mode. You can
now start and operate the vehicle normally.
Typically this override mode is used only if the transmitter has become
inoperative.
Page 3