background image

4

2009 Audiovox Electronics Corporation. All rights reserved.

  Activating the Trunk Release Feature (Optional)

If this feature is enabled on your system, pressing and holding the 

 button for 3

seconds will open the vehicle’s trunk or hatch.

  Activating Optional AUX 1 (Optional)

If this feature is enabled on your system, pressing the   and   buttons
simultaneously will activate an optional feature. This feature can be programmed
for a wide range of functions like power window or sunroof automation, please
consult your installing dealer to determine the functionality of your system.

  Using the Progressive Car Finder Feature

Press the 

 button to locate your vehicle. The system will sound 5 times at low

volume, increasing in volume each time the button is pressed.

  Using the Personal Protection Alarm (Panic)

Press and hold the 

 button for 3 seconds to activate the personal protection

alarm. During panic mode, the normal function of the transmitter buttons will be
suspended. The transmitter’s   and   buttons can be used to lock and unlock the
door (if the option is installed). To stop the alarm, press and hold the 

 button on

the transmitter again for 3 seconds. The system will automatically stop after 30
seconds.

To disengage valet mode:

1. Turn the ignition key to the ON position.
2. Press and release the emergency override button.
3. The LED will turn off indicating that the system has exited valet mode.

  Car Jack Mode

This feature must be turned on in system programming, please consult your
installing dealer.

Triggering Car Jack mode: While the ignition is ON and press and hold   +   for 2
seconds, the parking lights will flash 1 time and the system will act as follows;

1.

50 seconds after being triggered the siren will chirp for 15 seconds,

during this 15 seconds you will be alerted to push the valet button to turn
off Car Jack mode. If Car Jack mode is not turned off at this time it will
advance to the next step.

2.

Following the 15 second chirps (total time now 65 seconds) the siren

will go into full sound and the parking lights will start flashing.

Summary of Contents for CA 1150









Reviews: