background image

The use of this or any warning device does not ensure that all drivers can or will observe or
react to an emergency warning signal.  Never take the right-of-way for granted.  It is your
responsibility to be sure you can proceed safely before entering an intersection, driving
against traffic, responding at a high rate of speed,  or walking on or around traffic lanes.
The effectiveness of this warning device is highly dependent upon correct mounting and
wiring.  Read and follow the manufacturer’s instructions before installing or using this
device.  The vehicle operator should insure daily that all features of the device operate
correctly.  In use, the vehicle operator should insure the projection of the warning signal is
not blocked by vehicle components (i.e.: open trunks or compartment doors), people,
vehicles, or other obstructions.
This equipment is intended for use by authorized personnel only.  It is the user’s responsi-
bility to understand and obey all laws regarding emergency warning devices.  The user
should check all applicable city, state and federal laws and regulations.
Public Safety Equipment, Inc., assumes no liability for any loss resulting from the use of this
warning device.
Proper installation is vital to the performance of this warning device and the safe operation
of the emergency vehicle.  It is important to recognize that the operator of the emergency
vehicle is under psychological and physiological stress caused by the emergency situation.
The warning device should be installed in such a manner as to: A) Not reduce the output
performance of the system,  B)  Place the controls within convenient reach of the operator
so that he can operate the system without losing eye contact with the roadway.
Emergency warning devices often require high electrical voltages and/or currents. Properly
protect and use caution around live electrical connections.  Grounding or shorting of
electrical connections can cause high current arcing, which can cause personal injury and/
or severe vehicle damage, including fire.
PROPER INSTALLATION COMBINED WITH OPERATOR TRAINING IN THE PROPER
USE OF EMERGENCY WARNING DEVICES IS ESSENTIAL TO INSURE THE SAFETY
OF EMERGENCY PERSONNEL AND THE PUBLIC.

WARNING!

!

Notes:

Summary of Contents for NightProbe

Page 1: ...he holes in the mounting plate with the holes in the lens cover 5 Attach the spotlight with four 6x3 4 screws to the mounting plate 6 Remove the center lens of the lightbar and keep the four lens clips for reuse 7 Route the cables through the existing hole in the bottom of the lightbar insure that there is adequate length to reach the area in which the controller is to be mounted 8 Install the spo...

Page 2: ...01 4 Fastener 14x3 4 with washer seal T05070 06 5 Fastener 6x3 4 T01031 04 6 Fastener 8x 270 T01215 08 7 Spotlight mounting bracket Code 360 Excalibur S50795 01 MX S50593 01 8 Spacer Spotlight in lightbar S96254 03 9 Mounting Plate S50796 01 Shown separated for clarity actual assembly is sealed together with caulk adhesive Figure 2 ...

Page 3: ...ser should check all applicable city state and federal laws and regulations Public Safety Equipment Inc assumes no liability for any loss resulting from the use of this warning device Proper installation is vital to the performance of this warning device and the safe operation of the emergency vehicle It is important to recognize that the operator of the emergency vehicle is under psychological an...

Page 4: ...d by this warranty Code 3 Inc shall in no way be liable for other damages including consequential indirect or special damages whether loss is due to negligence or breach of warranty CODE 3 INC MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY INCLUDING WITHOUT LIMITATION WARRANTIES OF FITNESS OR MERCHANTABILITY WITH RESPECT TO THIS PRODUCT PRODUCT RETURNS If a product must be returned for repair or repla...

Reviews: