CodaOctopus F175 MOTION, Manual

Page: 26 / 27

Troubleshooting
Copyright © 2013 Coda Octopus Products Ltd
26
F175 MOTION Sensor - Trimble SPS361/SPS461 Integration
Problem Description
The Number of Satellites is not being
displayed The “GSOF Time and Position” message is not
being received.
Marinestar information is not being reported The F175 System does not decode Marinestar
information from the Trimble SPS361/SPS461.
The F175 System does not heading initialise
when going forwards If all the data is being received from the
Trimble SPS361/SPS461 then the internal GPS
is not working correctly. Please check the
primary and secondary (if in use) antennas
are connected correctly and the antenna
separation has been correctly defined in the
Settings Wizard and that this has been
measured to an accuracy to better than 5mm.
Differential Age not updated The age of the differential corrections is not
decoded from the Trimble GSOF messages.
Status is permanently displayed as Nav
Locking in MOTION Control There is a problem with the External GNSS
input. Please check the Connection
Properties dialog to check that data is being
received without being skipped and that
satellites are visible.