Codan 2110 series, Repair Manual

Page: 93 / 164

Repair procedures, tests, and adjustments
Manpack Transceiver 2110 series Repair Guide 61
1
Use NSP to program the test profile into the transceiver.
1
Record the name of the test profile that you have programmed into the transceiver
(see
page 109, Test sheet for the 2110 series Manpack Transceiver ).
1
Return to the Repair flowchart (see Figure 29 on page 95 ).
Cfg RF Pre-Amp Control List
On
Cfg Speaker External Control List
Enabled
Cfg Speaker Internal Front panel (
MUTE
key)
Control List
Disabled
( hold
MUTE
)
Easitalk
®
Front panel (
EASITALK
key)
Control List
Off
Key Beep Control List
Off
Mute Front panel (
MUTE
key)
Control List
Off
(S or V is not reverse highlighted on
screen)
Screen Brightness Front panel ( key to toggle
default/off, or +
0
to go to
setting in Control List)
Dark
NOTE
You can also make changes directly to the profile in the transceiver
using the front panel.
Table 15: Default settings for the transceiver during testing (cont.)
Item Location Setting