EN
G
LI
S
H
4
c)
Unplug the lead from the wall socket or remove the battery before
making any adjustments, changing accessories or storing the power tool
.
These precautions reduce the risk of the power tool starting unexpectedly.
d)
Store power tools that are not being used out of children’s reach. Do not
allow people who are unfamiliar with the tool or these instructions to operate
the tool.
Power tools are dangerous in the hands of untrained users.
e)
Properly maintain your power tools. Check for misalignment, binding of
moving parts, broken parts or anything else which might affect the operation
of the power tool. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
f)
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g)
Use the power tool, and any accessories in accordance with these
instructions, taking into account the working conditions and the work to be
performed.
Use of the power tool for a purpose other than that for which it is
intended could result in a dangerous situation.
5) Battery tool use and care
a)
Only charge the battery pack using a charger specified by the manufacture
.
A charger suitable for one type of battery pack can pose a potential fire hazard if
used with another battery pack.
b)
Use power tools only with specifically designated battery packs
. The use of
any other battery packs may create a risk of injury and fire.
c)
When not in use, the battery pack should be stored away from other metal
objects such as paper clips, coins, keys, nails, screws or any small metal
object that could bridge the gap between the battery terminals.
Shorting
the battery terminals together may cause burns or a fire.
d)
If batteries are abused there is a risk of them leaking acid. Avoid contact with
any acid. If contact accidentally occurs, flush with water. If the acid comes
into contact with your eyes, consult a doctor.
Battery acid can cause irritation
and burns.
6) Service
a)
Repairs and service should only be performed by qualified tradesmen, and
only with original spare parts.
This guarantees that the safety of the power tool is
maintained.
