EN
G
LI
S
H
11
Troubleshooting guide
Problem
Possible cause
Solution
The machine
does not start.
Flat/discharged battery.
Recharge the battery.
The battery is overheated.
Let the battery cool down.
Worn brushes.
Contact our Customer Services.
Faulty power trigger.
The machine
is slow and/or
shuts off.
Blunt or damaged drill bit.
Replace drill bit.
Too much pressure applied. Decrease applied pressure.
Flat/discharged battery.
Recharge the battery.
The battery is overheated.
Let the battery cool down.
The motor is overheated.
Let the machine cool down.
Unusual sounds
and/or strong
vibrations.
The drill/screwdriver bit is
not centred or incorrectly
fitted.
Make sure that the drill/screwdriver
bit is centred, correctly inserted
and securely fixed.
Sparks in
the motor.
Faulty brushes.
Contact our Customer Services.
Winding short circuited.
Dirty commutator.
Responsible disposal
This symbol indicates that this product should not be disposed of with
general household waste. This applies throughout the entire EU. In order
to prevent any harm to the environment or health hazards caused by
incorrect waste disposal, the product must be handed in for recycling
so that the material can be disposed of in a responsible manner. When
recycling your product, take it to your local collection facility or contact the
place of purchase. They will ensure that the product is disposed of in an
environmentally sound manner.
Specifications
No-load speed
0–400/1500 rpm
Battery
18 V 2.0 Ah lithium-ion LXC series
(4.0 Ah battery available as an accessory)
Torque settings
15 plus a drill setting, max 45 Nm
Charging time
approx. 55 mins for 2.0 Ah battery / 105 mins for 4.0 Ah battery
Sound level
LpA: 70.7 dB(A), uncertainty KpA: 3 dB(A)
LwA: 81.7 dB(A), uncertainty KwA: 3 dB(A)
Vibration value
ah 0.896 m/s², K: 1.5 m/s²
ah,D 1.393 m/s², K: 1.5 m/s² (Drilling in metal)
Weight
1.6 kg with 2.0 Ah battery or 1.9 kg with 4.0 Ah battery
