EN
G
LI
S
H
7
Electrical safety
Warning:
The following instructions state how to avoid accidents and injuries
due to electric shock:
• Damaged cables, connectors and plugs or extension leads not corresponding
to specifications, must not be used. Unplug the product immediately if the mains
cable or plug has been damaged. Under no circumstances must the damaged
cable or plug be touched until the product has been disconnected from the power
supply.
• If the internal power cable or power socket of the product has been damaged, it
must only be replaced by the manufacturer, authorised service facility or qualified
tradesman. This is to prevent the risk of electric shock or fire.
• Never use the product if the on/off switch is in any way damaged or malfunctioning.
Repairs must only be performed by the manufacturer, an authorised repair agent or
qualified electrician.
• Any extension cables used must be suitable for outdoor use and have a rating
of at least H07RN-F and a minimum conductor cross-sectional area of 1.5 mm²
(e.g. a 3G 1.5 mm² cable).
• If the extension lead has too small a conductor cross sectional area the machine’s
performance will be reduced considerably. For leads under 25 m in length a
minimum conductor cross-sectional area of 1.5 mm² is required, for cables over
25 m in length the cross-sectional area must be at least 2.5 mm² (i.e. 3G 2.5 mm²).
Always uncoil the entire extension cable and inspect it for damage before use.
• Never unplug the extension cable from the wall socket or connector on
the product by pulling the cable, always grip and pull the plug itself.
• Keep the cable away from heat, oil, sharp edges and moving parts.
Summary of Contents for 41-2506
Page 2: ......
