EN
G
LI
S
H
4
Operating instructions
Batteries
1. Remove the battery cover (3) and insert three batteries (AA/LR6). Note the polarity
markings on the bottom of the battery compartment to ensure correct insertion.
2. Refit the battery cover.
Self-levelling
Note:
The laser line will flash and the laser level will emit an audible signal when
the laser level is inclined too much (more than 5°) while it is in self-levelling mode.
1. Place the laser level on a firm, flat and vibration-free surface. The laser can also be
stood on its folding metal legs or fastened to a tripod using the ¼
″
tripod adaptor.
2. Turn on the laser using the power switch (6).
3. Press [
] (8) repeatedly to select the type of laser line: Cross, horizontal or vertical.
4. Switch the laser off using the on/off switch after use.
Note:
Always switch the laser off after you have finished levelling or when moving to
a different location. When the laser level is switched off, a built-in lock mechanism is
engaged to protect the levelling mechanism.