EN
G
LI
S
H
11
40
50
60
63
18
7
12
15
0
30
45
11
Settings
Warning: Always unplug the saw before making any adjustments or servicing it.
Setting the cutting depth
1. Undo the locking lever (18).
2. Lower the shoe (7) to the desired
depth according to the marks.
3. Tighten the locking lever.
Setting the parallel guide
1. Undo the locking knobs (12).
2. Set the desired width.
3. Tighten the locking screw.
4. Check the measurement.
Setting the tilt angle
1. Undo the locking knob (11).
2. Set the desired bevel angle, 0–45°.
3. Tighten the locking knob.
4. Measure the angle using a protractor
and adjust if necessary.