cocoweb.com
The information in this document is subject to change without notice.
COPYRIGHT
©
COCOWEB.COM, INC. 2015
COCOWEB.COM, INC.
3 Corporate Park, Suite 240
Irvine, CA 92606
Phone: 1-888-783-0378
22” LED GRAND PIANO LAMP WITH DIMMER (GPLED22)
USER MANUAL
Make sure the light toggle switch is in the OFF position before plugging in the piano lamp to the wall outlet. Use the toggle
switch on the lighting fixture or a properly installed wall switch to toggle the piano lamp ON and OFF. Plugging and
unplugging the power adapter to toggle the lamp ON and OFF can drastically reduce the life of the power adapter and may
cause it to malfunction.
WARNING
STEP 1: ATTACH MOUNTING CLAMP TO THE LAMP ARM
1. Remove the screw and cover from the mounting clamp
2. Insert the lamp arms into the mounting clamp assembly and replace the cover and screw.
STEP 2: MOUNT THE LAMP ONTO THE PIANO BOARD OR MUSIC STAND
1. Loosen the two thumbscrews.
2. Mount the mounting clamp onto a piano board or music stand
Note
You may have to manually adjust the opening of the mounting clamp if you have a thinner/thicker piano board.
3. Tighten the two thumbscrews making sure the lamp is securely fitted to the piano board or music stand.
LIGHT CONTROLS
1. The ON/OFF toggle switch is pre-installed on the lamp shade. Simply toggle the toggle switch to turn the lamp on or off.
2. Rotate the dimmer control to increase or decrease light brightness. Rotate counter clockwise until it clicks to turn lamp off.
Note
:
Piano lamp can be toggled on/off using dimmer or toggle switch. If light is not working, make sure both are in the on
position.
STEP 3: Plug in the adapter connection into the open port on the dimmer.
STEP 5: Plug in the power adapter into a wall outlet.
STEP 4: Plug in the power adapter from the dimmer into the bottom of the lamp arm
Thumb Screw
Cover
Screw
Mounting Clamp
Rotation
Adjustment
Screw