8
Figure 15
Figure 16
10. INSTALLING THE
LIGHT KIT
NOTE:
Before starting installation, disconnect
the power by turning off the circuit breaker or
removing the fuse at fuse box. Turning power
off using the fan switch is not sufficient to
prevent electric shock.
1. Remove the three screws from the mounting
plate.
2.While holding the light kit assembly under
your fan, snap together the wire connection
plugs. (Fig. 15)
3.Carefully push all wires back into the light kit
assembly, then install the light kit assembly
onto the mounting plate with 3 screws
previously removed. Be sure to tighten all
screws. (Fig. 15)
4.Remove the lock ring from the socket by
turning the lock ring counter-clockwise Until it
unlocks. Insert the glass into the glass holder
and turn the lock ring clockwise to tighten the
glass. Repeat for the remaining glass. (Fig. 16)
5.Install a 13 watt (max.) fluorescent lamps
(included) for each socket. (Fig. 16)
6. Restore power and your light kit is ready for
operation.
Screws
Mounting plate
Light kit
assembly
Wire connection
plugs
Lamps
Lock ring
Glass
holder
Glass shade
