Página
69
de
119
safyre
- Manual de usuario/User manual/Manuel de l’utilisateur
MKT-07-M1/20160623/MAN00159
In the case of using a
head with a monopole accessory
, both the head as well as the
passive plate must be connected.
In the case of connecting heads to the radio frequency jacks on the equipment (jack 1
and jack 2), the equipment shall display the recognition button for both jacks. Otherwise,
it shall only show the recognition button of the jack the head has been connected to.
To use the equipment with the pedal,
connect the Pedal correctly as indicated in
connection of
accessories and heads to the equipment.
To
select the work parameters
of the radio frequency mode:
To work in radio frequency mode, it is only necessary to program the power value (expressed as
a %) to work with. To do so, use the keys increase power (+) and decrease power (-) of the radio
frequency mode.
The radio frequency power values may be adjusted from 0% to 100%.
To
start / stop
the treatment:
Press the required RF recognition button (jack 1 or jack 2) and the required radio frequency jack
will be enabled.
To start the treatment using the
Start/pause RF treatment
button on the user interface, and for
it to be marked. Press the
Start/pause RF treatment
button again on the user interface and it
will be marked. Press the
Start/pause RF treatment
button again to pause the treatment.
If the pedal is used, activate/deactivate the pedal to start/pause the radio frequency
treatment.
RF recognition
button
RF treatment starts/ pause
button
