background image

2

After Sales Support

Telephone: 

   

1300 663 907

Internet: 

 

           www.winplus.com.au 

Warranty Details/Support 

This product is warranted against defects for a period of One year if the product is faulty,

Winplus will repair or replace the product (at its discretion) at no cost to you provided the

product has been used in accordance with instructions provided. The benefits under our 

Warranty are in addition to other rights and remedies under consumer law in relation

to these goods. Our goods come with guarantees that cannot be excluded under the 

Australian. Consumer Law. You are entitled to a replacement or refund for a major failure and 

for compensation for any other reasonably foreseeable loss or damage. You are also entitled 

to have the goods repaired or replaced if the goods fail to be of acceptable quality and the 

failure does not amount to a major failure.

General Safety Instructions

Read this manual thoroughly before first use and keep it in a safe place for future reference, 

along with the warranty card, purchase receipt and packaging. The safety precautions 

enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to. 

Follow all instructions and take notice of all warnings to reduce the risk of fire or electric 
shock.

• 

Do not expose this product to water, rain, moisture or dust. Electronic products of this kind 

should never be subjected to moisture or extreme temperatures.

• 

There are no user-serviceable parts inside this product. 

• 

Do not repair the unit yourself. If your device is not functioning correctly, disconnect the 

product from power, remove the batteries, and contact after sales support.

• 

Supervise young children to ensure they do not play with the product.

• 

Do not expose to water, dust, moisture, chemicals, oils, or other liquids.

• 

Do not expose to naked flames or other heat sources.

• 

Do not drop or subject the device to undue shock.

• 

Keep device away from magnets at all times. 

• 

Keep away from direct sunlight. Indoor use only.

• 

Unplug this device during lightning storms or when unused for long periods of time.

• 

Always observe basic security precautions – this device is not a substitute for basic security 
measures such as locking door and window locks.

For additional support including helpful guides and videos, visit the Cocoon support website 

at 

www.winplus.com.au/cocoon.html 

Telephone:   

1300 663 907

Email:    

[email protected]

Website:  

www.winplus.com.au

Address:

  

Winplus Australasia Pty Ltd, PO Box 537

 

 

Bayswater Business Centre Vic 3153

Summary of Contents for IT214054





























Reviews: