Getting Started Guide
HE180040 02/2020
8 CAMERA
SECURITY SYSTEM
WITH DVR
After Sales Support 1300 663 907
www.winplus.com.au
6.
Connect the power adaptor to the 8-way splitter and plug into an outlet. Switch the
outlet on.
7.
Connect the remaining power adaptor to the DVR and plug into a mains outlet.
Switch the outlet on. The DVR will begin the boot sequence.
NOTE: Both the DVR and cameras operate “always on”. To turn the cameras or DVR off, switch off
the power adaptors at the power outlet
5.
Connect the mouse to the rear USB port.
4.
Connect the included HDMI cable to the back of the DVR and connect the other end
of the HDMI cable to your monitor or TV.
NOTE: You must switch your TV or monitor to the correct INPUT once the DVR has been powered on.
For example, HDMI1