7
After Sales Support
Telephone:
1300 663 907
Internet:
www.winplus.com.au
InSTruCTIonS
fitting the Bluetooth receiver to your helmet
1. Using the provided screw driver, loosen the
Headset Clip screws.
2. Slide the Headset Clip onto the left side of the helmet
(when on your head). Take care to place the inside of
the Headset Clip under the helmet padding.
3. Adjust the clip until you find the best location for your
helmet. Ensure that the slots in the Headset Clip mount
are facing away from the helmet.
4. Tighten the screws to hold the clip firmly in place.
WARNING: Excessive tightening may damage the clips.
5. Slide the Bluetooth receiver down into the slots on
the Headset Clip mount. Make sure that it is locked
in securely.
6. To attach the ear speaker & microphone headset,
test which part of the helmet will be the best location
by putting your helmet on and locating the place
closest to your ears. You will need to put the helmet on
a few times to find the optimum position to apply
the pad. When the correct position is found, remove
the adhesive protective strip and apply the felted
earphone pad.