CoCo TPC-300, Quick Installation Manual

Page: 14 / 109

TPC-300 WIRELESS HOME CONTROL STATION
14
Add devices
Single-click on one of the available images to select that image, or double-click an image to replace it by your
own photo. Then, select whether the receiver a
dimmer
(yes or no) and add a device description. When you press
the cancel button, you will return to the main menu without saving any modifications.
Depending on the type of receiver, there are now 2 necessary procedures to choose from:
1. Automatic code system receiver
Press
learn code
. The TPC-300 will start sending signals. Then, activate the learn-mode of a receiver (see manual
of the receiver). The receiver will now automatically receive and store the TPC-300 tranmission code. Press
learn
off to stop sending transmission signals. Finally, press OK .
2. Codeswitch receiver
Click cancel to return to the main menu. From the main menu, choose extra , select yes for “code wheels” and
press OK . Then, add a device, select yes for codeswitch receiver and program the matching code (e.g. A-3).
Finally, press
OK.
After you have added a room, you can add devices to that room. Double-click on the black box of “devices” in the
main menu, to add a device. A maximum of 16 different devices can be programmed, per room.
You can browse through all
available images by clicking
on the small tiles in the top
left corner.
EN