AWMR-230 MINI BUILT-IN SWITCH
4
[5]
Connect the wires you disconnected previously
to the built-in switch: [1]
L
: ‘Hot wire’ (brown, from
the central junction box), [2] : ‘Switch wire’
(black, from the light). Push the built-in switch into
the wall box.
2
1
230 VAC
[6]
Switch on the mains power.
The indicator on the built-in switch remains lit
as long as there is power on the circuit!
The built-in switch is normally off. It can only be
switched on once a connection is established to a
transmitter [7 – 8]!
If in doubt or if the wire colours are different,
ask your installer!
The total load must not exceed 230 Watts!
