ACDB-6600AC CHIME WITH WIRELESS PUSH BUTTON
2
BATTERY
Remove the transmitter battery if the product will not
be used for an extended period. Extreme temperatures
reduce the capacity and lifetime of the battery.
Replace the 3x AA 1,5 Volt alkaline batteries when
the reach of the transmitter starts to decrease. If the
problem remains, replace the CR2032 3V lithium
battery of the push button.
Dispose of batteries according to local regulations.
Please recycle when possible. Do not dispose as
household waste.
LIFE-SUPPORT
Never use COCO products for life-support systems or
other applications in which equipment malfunctions
can have life-threatening consequences.
INTERFERENCE
All wireless devices may be subject to interference,
which could affect performance. The minimum distance
between 2 receivers should be at least 50 cm.
REPAIRING
Do not attempt to repair this product. There are no
user-serviceable parts inside.
WATER-RESISTANCE
The doorbell chime receiver is not water-resistant.
Keep it dry. Moisture will corrode the inner electronics
and can result in a short circuit, defects and shock
hazard. The doorbell push button transmitter is IP44
waterproof.
CLEANING
Use a dry cloth to clean this product. Do not use harsh
chemicals, cleaning solvents, or strong detergents.
HANDLING
Do not drop, knock, or shake the device. Rough
handling can damage internal circuit boards and fine
mechanics.
ENVIRONMENT
Do not expose the product to excessive heat or cold,
as it can damage or shorten the life of electronic circuit
boards and batteries.
Read these simple guidelines. Not following them may be dangerous and faulty installation will invalidate any
warranty that may apply to this product.
