
14
2-6-2 How to connect for RAID system
<NOTICE> For RAID system connection, we strongly recommend to ask our distributor or dealer
about 'how to connect' and 'matters that require attention'
2-6-2-1 Cable
connection for RAID system
2-6-2-2. Switch settings for RAID mode
1) X50 offers two(2) modes of RAID
according to switch settings
-. SW1: ON, SW2: OFF is BIG mode
-. SW1: ON, SW2: ON is RAID1(Mirror)
mode
2) Activating RAID mode
After switch setting, you need to activate
RAID according to the below procedures
① Set RAID mode as you want
② Make X50 Power Switch at rear ON
③ Power X50 ON with RAID Switch
pressed.
④ Keep RAID Switch pressed until
Blinking LED blinks three times
How to connect each cable
-. Cable to Storage #1 to Connector #1
-. Cable to Storage #2 to Connector #2
-. Connect cables like left picture
Cable to Storage #1
Cable to Storage #2
Summary of Contents for X50
Page 1: ...1 Rev1 0 English ...