Using the telecoil
The telecoil is used to receive sound signals from a telephone,
roomloop, neckloop, etc. It can also receive sound signals from an
amplifier, TV or Hi-Fi through an induction loop. The telecoil is a feature
that needs to be enabled by your clinician.
The telecoil is always turned off by default when you turn on your
processor. To turn on the telecoil, press the upper button. A single long
flash of green confirms that the telecoil is turned on.
To turn off the telecoil while using the processor, press the upper
button again. A single long flash of orange confirms that the telecoil
is turned off.
When an audio accessory is connected to your processor, you will not
receive any sound from the telecoil. To move back to using the telecoil,
remove the audio accessory from the processor. Turn off the telecoil
when not in use, as it reduces the microphone volume.
34 - CP802 Sound Processor User Guide
© Cochlear Limited 2016
Summary of Contents for Nucleus CP802
Page 1: ...Nucleus CP802 Sound Processor User Guide...
Page 55: ......
