4.4.2.
Place one hand into the ring of the headrest adjust handle (part no.26) on the top
of the headrest and hold on. At the same me press your thumb on the top of the
headrest (part no.01) (Fig. 8).
4.4.3.
Pull up and push down the headrest to adjust the height.(Fig. 8) Then relax your
hand when the headrest is at the suitable posi on, pull and push again to ensure
that the headrest is locked in place (Fig. 8).
5.
Seat selec on and adjustment
5.1
Adjus ng the car seat
If installa on is prevented by a vehicle headrest, it must be set at the highest posi on
or removed (Fig. 9).
Put the seat on the vehicle seat, ensure that the backrest of seat can rest securely
against the backrest of the vehicle seat (Fig. 10).
5.2
Seat for universal installa on for (Group 0+, 1, 2, 3)
The child restraint seat can be installed in vehicles on any seat suitable for use in the
listed vehicles fi ed with 3 point retractor safety-belts, approved to ECE Regula on
No. 16 or other equivalent standards (Fig. 11).
It must not at any me be fi ed using only a 2 point lap belt. When used in Group 0+
and Group 2 +3 (Fig. 12).
If the car manufacturer allows the child restraint system to be used on the front
passenger seat, the seat should be moved to the posi on furthest back (Fig. 13).
We suggest to always install this child seat at the rear seat of the vehicle. This will be a
safer posi on for your child.
