background image

TRACKING mode

1. Press the       button once to get the beginning of current track.

2. Repeatedly press the       button to go to the previous tracks.

3. Press the       button to go to the next track.

4. To fast backward/fast forward through the disc, 

    press and hold the                button.

1. Under the stop mode or the playback mode, repeatedly press 

    the DIGIT button, the digit starts flashing for each time DIGIT

    button is pressed. For MP3 there are three digits and CD two 

    digits.

2. Press SEARH button to enter the desired track and press    

    PLAY/PAUSE button to start playback.

1. Press the PROGRAM button at stop mode. Program indicator 

    appears on the screen.

2. Press the        or       button to select the desired track, and 

    then press PROGRAM  to confirm. 

3. Repeat step 2 to set up to 20 tracks. 

4. Press the PLAY/PAUSE button to start playing. 

5. To stop the program play, press the STOP button once.

6. To exit program mode, press the STOP button twice, program 

    indicator disappears and the memory will be erased.

/

TROUBLE SHOOTING

Should your player develop a problem, please check below 

before requesting service.

* Check if the power cord has been properly   
  connected to the power outlet.
* Be sure to select a sound source. 
* Unplug the main unit, and then reconnect it. This 
   allows the unit to reset itself after a power surge 
   or power interruption. 

* Increase the volume.
* Disconnect any headphones.

* No disc. Load a disc.
* Disc has been loaded upside down. Place the    
  disc withthe label side up.
* Disc is damaged or dirty. Clean the disc or try   
  another one.
* Moisture may be condensed inside the player. 
  Remove the disc and leave the unit power on for 
  one or two hours.
* Disc is incorrect type for the player. 

* You may be in an area of weak signal coverage.

Symptom                                          Check and Action

System does 
not function at 
all

No sound

CD does 

not play

Radio does 

not work

Power Supply:            110V~60Hz/220V~50Hz dual voltage 
Applicable disc:           CD/CD-R/MP3
Power Consumption:  4.2W 
Output Power:            1W x2
Speaker:                     8 OHM
Dimensions:                210(L) x143.5 (H) x220 (W) mm (main unit)
Weight:                       1650g (main unit)

RADIO

Frequency Range:      AM: 530KHz - 1700KHz
                                    FM: 88MHz - 108MHz

CD Player

Laser Wavelength:      760 ~ 800 nm
Tracking Method:        3-spot error detection/3.86 mm lens

Design and specifications are subject to change without notice.

SPECIFICATION

5

6

7

Reviews: