Coby DVD978, Instruction Manual

Page: 51 / 190

www.cobyusa.com Page 51
Engl
ish
Troubleshooting
Symptom Cause Remedy
No Power The AC power cord is not
connected to the power
supply or is not connected
securely Please check that the AC power cord is
connected securely.
There is no picture
or the picture is
distorted The Video Input mode of
the connected TV is set
incorrectly. Set the TV to the correct source mode.
Most TVs have a “Source,” “Input,” or
“TV/Video” button that changes the
source mode. Please refer to the docu-
mentation provided by the TV manufac-
turer for further assistance.
The Video Output mode is
set incorrectly. Press <V-MODE> repeatedly until the
picture becomes normal again.
The video cable connec-
tion is loose. Connect the video cable securely.
There is no sound or
the sound is distorted The audio cable connec-
tions are loose. Connect the audio cables securely.
The volume is set at the
lowest level. Turn up the volume.
The sound is switched off
(MUTE is active). Press [MUTE] on the remote control to
re-enable the sound.
The disc is in forward or
reverse scan mode. Press [PLAY] to resume normal playback.