3
Read Me
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth
Do not block any ventilation openings. Install
in accordance with the manufacturer’s
instructions.
Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
Protect the power cord from being walked
on or pinched particularly at plugs, and the
point where they exit from the apparatus.
Only use attachments/accessories specified
by the manufacturer.
Unplug this apparatus during lightning
storms or when unused for long periods of
time.
If repairs are necessary, please use qualified
service personnel. Repairs may be necessary
if the device has been damaged in any way.
Such as the power-supply cord or plug being
damaged, the device being exposed to rain or
moisture, objects falling into the device, the
device does not operate normally, or has been
dropped.
Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
FCC Notice to Users
FCC ID: 2AMSOCPA
640
Caution: Changes or
modifications not expressly
approved by the Party responsible
for compliance could void the user’s
authority to operate the equipment.
Note: This equipment has been tested
and found to comply with the limits for a
Class B digital device, pursuant to part 15
of
the FCC
Rules.
These limits are
designed to provide reasonable
protection Against harmful interference in
a residential installation. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed and
used in accordance with the instructions,
may cause harmful interference to radio
communications, however there is no
guarantee that interference will not occur
in a particular installation. If this
equipment does cause harmful
interference
to
radio
or
television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
•
Reorient or relocate the receiving
antenna.
•
Increase the separation between the
equipment and receiver.
•
Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
•
Consult the dealer or an experienced
radio/TV technician for Help.
The device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference, and
(2) this device must
accept any
interference received, including
interference that may cause undesired
operation. The Bluetooth
®
word mark and
logos are registered trademarks owned
by Bluetooth SIG, Inc. and any use of
such marks by Summit Electronics LLC is
under license. Other trademarks and
trade names are those of their respective
owner.
