EasySet Programming
8
English
Your Detector
Mode
Tone
Display/Voice
Result
Set
IntelliShield
City mode
default*
Two beeps
City X
A single beep sounds when the
signal is first detected.
One beep
City X
beep Off
Audio for all X band alerts are blocked
until signal strength reaches Level 3.
One beep
City X+K
Combines the City X mode with
prevention of K band audio alerts
until signal strength reaches Level 2.
IntelliMute
mode
Two beeps
IntelliMute On
All alerts (except for strobe signals
from emergency vehicles) are
automatically muted below the
engine rev point you set.
One beep
IntelliMute Off
Normal operation.
Set
IntelliMute
RPMs
One beep
Set IntelliMute
(see page 15
to set activation
point)
Allows you to set the engine
rev point while using IntelliMute.
Note: Only shown if IntelliMute is Off.
IntelliMute
Pro mode
Two beeps
IntelliMute Pro
On
All radar, VG-2 and Spectre detection is
turned Off below the engine rev set point.
One beep
IntelliMute Pro
Off
Normal operation.
Auto Mute
mode
Two beeps
AutoMute On
The audio volume of all alerts will be
automatically muted after four seconds for
as long as the signal is detected.
One beep
AutoMute Off
All alerts will sound at full volume
for as long as the signal is detected.
Set
Compass
One beep
Set Compass
Allows you to calibrate the compass.
(see page 18 to calibrate compass)
Pop Detect
mode
Two beeps
Pop Detect On
Unit will detect Pop signals.
One beep
Pop Detect Off
Unit will not detect Pop signals.
This EasySet programming menu lists all of the modes and settings you can
choose from after you have entered Program mode as described on page 7.
Mode
Tone
Display/Voice
Result
VG-2 Detect
mode
Two beeps
VG-2 Detect On
Unit will detect VG-2 signals.
One beep
VG-2 Detect Off
Unit will not detect VG-2 signals.
VG-2 Audio
mode (not
shown if VG-2
detect is Off)
Two beeps
VG-2 Audio On
With VG-2 Detect On, the unit will give
audible alerts for VG-2 signals.
One beep
VG-2 Audio Off
With VG-2 Detect Off, the unit will give
only visual alerts for VG-2 signals.
Spectre
Detect mode
Two beeps
Spectre
Detect On
Unit will detect Spectre I & IV+ signals.
One beep
Spectre
Detect Off
Unit will not detect Spectre I & IV+
signals.
Spectre
Audio mode
(not shown
if Spectre
detect is Off)
Two beeps
Spectre Audio
On
With Spectre Audio On, unit will give
audible alerts for Spectre signals.
One beep
Spectre Audio
Off
With Spectre I Audio Off, unit will give only
visual alerts for Spectre I & IV+ signals.
SmartPower
mode
Two beeps
SmartPower On
SmartPower is On.
One beep
SmartPower Off
SmartPower is Off.
X Band
Detect mode
Two beeps
X Band On
Unit will detect X Band signals.
One beep
X Band Off
Unit will not detect X Band signals.
K or Ku Band
Detect mode
Two beeps
K or Ku Band On
Unit will detect K or Ku Band signals.
One beep
K or Ku Band Off
Unit will not detect K or Ku Band signals.
Set display
Dim mode
default*
Two beeps
Display Dim
Partially dimmed for dusk or night driving.
One beep
Display
Dimmer
More dimmed for dusk or night driving.
One beep
Display Dark
Display is Off.
Restore factory
settings
One beep
Restore Factory
Settings
Resets user modes and settings to
factory default.
Exit program
One beep
EXIT PROGRAM
Allows you to exit Program mode.
* The settings for these user modes can also be changed
with the one button method.See description of each user
mode (pages 10 and 25) for details.
Nothing
Comes Close to a Cobra
®
9
Your Detector
EasySet Programming
