Mode
Tone
Visual Setting
Result
VG-2 Detect
mode
Two beeps
VG-2 Detect On
Unit will detect VG-2 signals.
One beep
VG-2 Detect Off
Unit will not detect VG-2 signals.
VG-2 Audio
mode (not
shown if VG-2
detect is off)
Two beeps
VG-2 Audio On
With VG-2 Detect on, the unit will give
audible alerts for VG-2 signals.
One beep
VG-2 Audio Off
With VG-2 Detect off, the unit will give
only visual alerts for VG-2 signals.
Spectre 1
Detect mode
Two beeps
Spectre 1
Detect On
Unit will detect Spectre 1 signals.
One beep
Spectre 1
Detect Off
Unit will not detect Spectre 1 signals.
Spectre 1
Audio mode
(not shown if
Spectre 1
detect is off)
Two beeps
Spectre 1 Audio
On
With Spectre 1 Detect on, the unit will
give audible alerts for Spectre 1 signals.
One beep
Spectre 1 Audio
Off
With Spectre 1 Detect off, the unit will give
only visual alerts for Spectre 1 signals.
SmartPower
mode
Two beeps
SmartPower On
SmartPower is on.
One beep
SmartPower Off
SmartPower is off.
K or Ku Band
detect mode
Two beeps
K or Ku Band On Unit will detect K or Ku Band signals.
One beep
K or Ku Band Off
Unit will not detect K or Ku Band signals.
X Band
detect mode
Two beeps
X Band On
Unit will detect X Band signals.
One beep
X Band Off
Unit will not detect X Band signals.
Set display
Dim mode
default*
Two beeps
Display Dim
Partially dimmed for dusk or night driving.
One beep
Display
Dimmer
More dimmed for dusk or night driving.
One beep
Display Dark
Display is off.
Restore factory
settings
One beep
Restore Factory
Settings
Resets user modes and settings to
factory default.
Exit program
One beep
EXIT PROGRAM
Allows you to exit Program mode.
* The settings for these user modes can also be changed with the one button method.
See description of each user mode (pages 10 and 23) for details.
EasySet Programming
Nothing Comes Close to a Cobra
®
9
EasySet Programming
8
English
Intro
Operation
Customer
Assistance
Warranty
Notice
Secondary Icons
Your Detector
EasySet Programming Menu
Mode
Tone
Visual Setting
Result
Set City
mode
default*
Two beeps
City X
A single beep sounds when the
signal is first detected.
One beep
City X
beep Off
Audio for all X band alerts are blocked
until signal strength reaches Level 3.
One beep
City X+K
Combines the City X mode with
prevention of K band audio alerts
until signal strength reaches Level 2.
IntelliMute
mode
Two beeps
IntelliMute On
All alerts (except for strobe signals
from emergency vehicles) are
automatically muted below the
engine rev point you set.
One beep
IntelliMute Off
Normal operation.
Set IntelliMute
RPMs
(not shown
if IntelliMute
is off)
One beep
Set IntelliMute
(see page 14
to set activation
point)
Allows you to set the engine
rev point while using IntelliMute.
AutoMute
mode
Two beeps
AutoMute On
The audio volume of all alerts will be
automatically muted after four seconds for
as long as the signal is detected.
One beep
AutoMute Off
All alerts will sound at full volume
for as long as the signal is detected.
Set compass
One beep
Set Compass
(see page 16
to calibrate
compass)
Allows you to calibrate the compass.
Pop Detect
mode
Two beeps
Pop Detect On
Unit will detect Pop signals.
One beep
Pop Detect Off
Unit not will detect Pop signals.
This EasySet programming menu lists all of the modes and settings you can
choose from after you have entered Program mode as described on page 7.
Intro
Operation
Customer
Assistance
Warranty
Notice
Secondary Icons
Your Detector
