Cobra XRS 9530, Operating Instructions Manual

Page: 9 / 15

Settings
Intro Operation Customer
Assistance
Warranty
Notice
Secondary Icons
Your Detector
Nothing Comes Close to a Cobra ® 13
Settings
Intro Operation Customer
Assistance
Warranty
Notice
Secondary Icons
Your Detector
12 English
Spectre 1, VG-2 Alert Audio Settings, K & Ku Band Detection
The detector is undetectable by police Spectre 1 and VG-2 radar detector detectors and
will alert you when such a device is in use near your vehicle. During the alert, the unit
continues to detect other signals. You can choose whether or not you want your unit to
show Spectre 1 and VG-2 alerts. The factory setting is Spectre 1 and VG-2 alert off.
Dim Button
Press and hold
for two seconds
Voice/Tone Setting
You can set your detector to sound alerts with either a Voice
or a Tone. You can change settings by using the Mute button.
In Voice Alert mode, you will first hear several tones, then a
voice message announcing the type of signal detected, followed
by more tones. In Tone Alert mode, you will hear the tones only.
The factory setting is Voice Alert mode.
Spectre 1 and VG-2 On
Spectre1
& VG2
On
Spectre 1 and VG-2 Off
Spectre1
& VG2
Off
City Button
Press and hold
for two seconds
* The new Ku band may be introduced to North America in
the future. To prevent false alerts until it is, the factory default
for Ku band detection is off.
To Turn Spectre 1 and VG-2 Alerts On and Off
While no signal
is being detected,
press and hold
the Dim button
for two seconds.
Tone Voice
Visual Display
Two beeps Spectre
VG-2 On
Spectre1
& VG 2 On
One beep Spectre
VG-2 Off
Spectre1
& VG 2 Off
To Turn K Band On and Off
Tone Voice Visual Display
Two beeps K On K On
One beep K Off K Off
While no signal is
being detected,
press and hold
both the Dim and
City buttons for
two seconds.
To Turn Ku Band* On and Off
Tone Voice Visual Display
Two beeps Ku On Ku On
One beep Ku Off Ku Off
While no signal
is being detected,
press and hold
the City button
for two seconds.
Mute Button
Press and hold for
two seconds
To Change From Voice Alert to Tone Alert
While no signal
is being detected,
press and hold
the Mute button for
two seconds.
Tone Voice Visual Display
One beep Tone Alert None
To Change From Tone Alert Back to Voice Alert
While no signal
is being detected,
press and hold
the Mute button
for two seconds
again. Tone Voice Visual Display
None Voice Alert None