background image

Settings

Your Detector

Nothing comes close to a Cobra

®

11

Settings

Your Detector

10 English

Settings

Highway/City Mode

Your detector has a Highway mode and three (3) different levels of City
modes: City X, City X Beep Off and City X+K. City X mode sounds a single
beep when the signal is first detected. City X Beep Off mode prevents all 
X band audio alerts until the signal strength reaches Level 3. City X+K mode
combines the City X mode with prevention of K band audio alerts until the
signal strength reads Level 2. This will reduce false alerts while you are
driving in or near urban areas where there are many sources for conflicting 
X or K band signals such as microwave towers and automatic door openers.
The factory setting is Highway. The factory City mode default setting is City X.

Setting City Default

You can set the default level for City mode (City X, City X Beep Off and 
City X+K) either in Program mode or directly using the Set/City button.

Set/City Button

Press and release

Set/City Button

Press and hold

City Mode

Highway Mode

N W

h

N W

c

To Change From Highway Mode To City Mode

Press and
release the
Set/City button.

Tone

Visual Display

Voice

One (1) beep

appears in 
the display

City X or City X Beep
Off 
or City X, K

To Change From City Mode Back To Highway Mode

Press and release
the Set/City
button again.

Tone

Visual Display

Voice

Two (2) beeps

appears in 
the display

Highway

To Set The City Mode Default Directly Using The Set/City Button

Press and hold the
Set/City button.

Tone Or Voice

Visual Display

One (1) beep each time
the display cycles

Cycles — see chart above

Release the Set/City
button to select the
current display as
default.

None

City X Beep Off
City X+K or City X

To Set The City Mode Default Using Program Mode 

(See Page 7 For Instructions On Using Program Mode)

In Program mode, 
go to City.

Tone

Visual Display

Voice

One (1) beep

City X Beep Off

City X Beep Off

One (1) beep

City X+K

City X, K

Two (2) beeps

City X

City X

Press and
hold the
Set/City
button

City
X+K

City X

City X
Beep Off

NOTE
When you change to City mode, the unit will enter 
whichever city default mode is set at the time.

City X Beep Off

City X

Beep Off

City X+K

City X+K

City X

City X

Summary of Contents for XRS 777





















Reviews: