Cobra VnM2 SignMaker, User Manual

Page: 8 / 20

1. Connect the RS232 cable (male) from
the VnM Keypad to the back of the VnM2
SignMaker RS232 port (female).
2. Tighten the RS232 screws to prevent the
cable from being pulled off.
1. After connecting the VnM2 Keypad to the
VnM2 SignMaker, connect the two-piece
power supply.
2. Once the power supply is put together,
connect the power to the VnM2 Sign-
Maker as shown in the picture.
3. Plug the 3-prong plug into the electrical
outlet.
4. Turn on the VnM2 SignMaker, select
your template and print!
Connecting VnM2 Keypad
Powering Up the VnM2 SignMaker
1
2
1
2
3
4
/IMPORTANT
RECOMMEND POWERING VNM2
WITH A SURGE PROTECTOR
6