- 9 -
1. To fit: raise the rear cover and hitch the grass catcher on the rear of mower. (Fig. 2F, Fig.2G, Fig. 2H)
2. To remove: grasp and lift the rear cover, remove grass catcher.
Fig. 2F Fig. 2G Fig.2H
5.3 STARTER HANDLE
Engage the Brake control handle then move the starter handle from the engine to the rope guide.
Fig.3A for the Briggs engine Fig.3B for the Cobra engine
5.4 HEIGHT OF CUT
Apply outward pressure to disengage the lever from the rack. Move lever forward or back to adjust height.
(Fig.4 and
see clause 6.9)
Fig. 4
5.5 Rear Roller
Your mower features a rear roller, which helps cut right up to the edge of borders and creates a traditional
striped lawn finish. It is recommended to alternate the direction of mowing periodically, to improve turf growth.
Vary the height of cut depending on the lawn and weather conditions.
Fig.5A Fig.5B Change the cutting pattern alternate weeks
